dmesg - KINGSTON SUV400S - Intel Xeon D-1521
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-116-generic (buildd@lgw01-amd64-021) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #140-Ubuntu SMP Mon Feb 12 21:23:04 UTC 2018 (Ubuntu 4.4.0-116.140-generic 4.4.98)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000078e85fff] usable
BIOS-e820: [mem 0x0000000078e86000-0x0000000079a16fff] reserved
BIOS-e820: [mem 0x0000000079a17000-0x0000000079af9fff] usable
BIOS-e820: [mem 0x0000000079afa000-0x0000000079fc7fff] ACPI NVS
BIOS-e820: [mem 0x0000000079fc8000-0x000000007bd95fff] reserved
BIOS-e820: [mem 0x000000007bd96000-0x000000007bd96fff] usable
BIOS-e820: [mem 0x000000007bd97000-0x000000007be1cfff] reserved
BIOS-e820: [mem 0x000000007be1d000-0x000000007bffffff] usable
BIOS-e820: [mem 0x000000007c000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: GIGABYTE MB10-DATTO-O7/MB10-DATTO-O7, BIOS F01 06/23/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 020000000000 mask 3FC000000000 uncachable
2 base 0000FBA00000 mask 3FFFFFE00000 write-through
3 base 0000FBC00000 mask 3FFFFFE00000 write-through
4 base 0000FBE00000 mask 3FFFFFF00000 write-through
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fccb0-0x000fccbf] mapped at [ffff8800000fccb0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x02215000, 0x02215fff] PGTABLE
BRK [0x02216000, 0x02216fff] PGTABLE
BRK [0x02217000, 0x02217fff] PGTABLE
BRK [0x02218000, 0x02218fff] PGTABLE
BRK [0x02219000, 0x02219fff] PGTABLE
BRK [0x0221a000, 0x0221afff] PGTABLE
RAMDISK: [mem 0x3369a000-0x35b44fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000079B420A8 0000D4 (v01 GBT GBTUACPI 01072009 AMI 00010013)
ACPI: FACP 0x0000000079B72688 00010C (v05 GBT GBTUACPI 01072009 AMI 00010013)
ACPI: DSDT 0x0000000079B42218 03046C (v02 GBT GBTUACPI 01072009 INTL 20091013)
ACPI: FACS 0x0000000079FC6F80 000040
ACPI: APIC 0x0000000079B72798 0000C8 (v03 GBT GBTUACPI 01072009 AMI 00010013)
ACPI: FPDT 0x0000000079B72860 000044 (v01 GBT GBTUACPI 01072009 AMI 00010013)
ACPI: FIDT 0x0000000079B728A8 00009C (v01 GBT GBTUACPI 01072009 AMI 00010013)
ACPI: SPMI 0x0000000079B72948 000041 (v05 GBT GBTUACPI 00000000 AMI. 00000000)
ACPI: MCFG 0x0000000079B72990 00003C (v01 GBT GBTUACPI 01072009 MSFT 00000097)
ACPI: UEFI 0x0000000079B729D0 000042 (v01 GBT GBTUACPI 00000000 00000000)
ACPI: DBG2 0x0000000079B72A18 000072 (v00 GBT GBTUACPI 00000000 INTL 20091013)
ACPI: HPET 0x0000000079B72A90 000038 (v01 GBT GBTUACPI 00000001 INTL 20091013)
ACPI: MSCT 0x0000000079B72AC8 000090 (v01 GBT GBTUACPI 00000001 INTL 20091013)
ACPI: SLIT 0x0000000079B72B58 00002D (v01 GBT GBTUACPI 00000001 INTL 20091013)
ACPI: SRAT 0x0000000079B72B88 001158 (v03 GBT GBTUACPI 00000001 INTL 20091013)
ACPI: WDDT 0x0000000079B73CE0 000040 (v01 GBT GBTUACPI 00000000 INTL 20091013)
ACPI: SSDT 0x0000000079B73D20 00EDE7 (v01 GBT GBTUACPI 00000001 INTL 20120913)
ACPI: SSDT 0x0000000079B82B08 0020C3 (v02 GBT GBTUACPI 00000002 INTL 20120913)
ACPI: SSDT 0x0000000079B84BD0 000064 (v02 GBT GBTUACPI 00000002 INTL 20120913)
ACPI: PRAD 0x0000000079B84C38 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: DMAR 0x0000000079B84D40 0000BC (v01 GBT GBTUACPI 00000001 INTL 20091013)
ACPI: HEST 0x0000000079B84E00 0000A8 (v01 GBT GBTUACPI 00000001 INTL 00000001)
ACPI: BERT 0x0000000079B84EA8 000030 (v01 GBT GBTUACPI 00000001 INTL 00000001)
ACPI: ERST 0x0000000079B84ED8 000230 (v01 GBT GBTUACPI 00000001 INTL 00000001)
ACPI: EINJ 0x0000000079B85108 000130 (v01 GBT GBTUACPI 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff]
NODE_DATA(0) allocated [mem 0x87fff8000-0x87fffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000087fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x0000000078e85fff]
node 0: [mem 0x0000000079a17000-0x0000000079af9fff]
node 0: [mem 0x000000007bd96000-0x000000007bd96fff]
node 0: [mem 0x000000007be1d000-0x000000007bffffff]
node 0: [mem 0x0000000100000000-0x000000087fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
On node 0 totalpages: 8360169
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 7686 pages used for memmap
DMA32 zone: 491853 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x78e86000-0x79a16fff]
PM: Registered nosave memory: [mem 0x79afa000-0x79fc7fff]
PM: Registered nosave memory: [mem 0x79fc8000-0x7bd95fff]
PM: Registered nosave memory: [mem 0x7bd97000-0x7be1cfff]
PM: Registered nosave memory: [mem 0x7c000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff88087fc00000 s99544 r8192 d31528 u262144
pcpu-alloc: s99544 r8192 d31528 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8229518
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32792788K/33440676K available (8530K kernel code, 1309K rwdata, 3992K rodata, 1508K init, 1316K bss, 647888K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:896 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2399.889 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.77 BogoMIPS (lpj=9599556)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
FEATURE SPEC_CTRL Not Present
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 mitigation: Mitigation: Full generic retpoline
Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
Freeing SMP alternatives memory: 32K
ftrace: allocating 32186 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000007bc09000 end: 0x0000007bc19fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU D-1521 @ 2.40GHz (family: 0x6, model: 0x56, stepping: 0x3)
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (38398.22 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x79afa000-0x79fc7fff] (5038080 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:00:57, date: 04/30/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: PRAD 0x0000000000000000 000102 (v02 ALASKA A M I 00000002 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [mem 0x20000000000-0x23fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb305000-0xfb305fff]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x23ffff00000-0x23ffff0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb304000-0xfb30400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfb303000-0xfb30300f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb301000-0xfb3013ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb300000-0xfb3007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x23ffff11000-0x23ffff110ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0x23ffff10000-0x23ffff10fff 64bit]
acpiphp: Slot [0] registered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:6f50] type 00 class 0x088000
pci 0000:02:00.0: reg 0x10: [mem 0xfb206000-0xfb207fff 64bit]
pci 0000:02:00.1: [8086:6f51] type 00 class 0x088000
pci 0000:02:00.1: reg 0x10: [mem 0xfb204000-0xfb205fff 64bit]
pci 0000:02:00.2: [8086:6f52] type 00 class 0x088000
pci 0000:02:00.2: reg 0x10: [mem 0xfb202000-0xfb203fff 64bit]
pci 0000:02:00.3: [8086:6f53] type 00 class 0x088000
pci 0000:02:00.3: reg 0x10: [mem 0xfb200000-0xfb201fff 64bit]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:03:00.0: [8086:15ad] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0xfb180000-0xfb1fffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:03:00.1: [8086:15ad] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref]
pci 0000:03:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref]
pci 0000:03:00.1: reg 0x30: [mem 0xfb100000-0xfb17ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:07:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:07:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe07f]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xe000-0xefff]
pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:07:00.0
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x78e86000-0x7bffffff]
e820: reserve RAM buffer [mem 0x79afa000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bd97000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 3 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: max bus depth: 2 pci_try_num: 3
pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x20000000000-0x200001fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:03:00.0: BAR 7: no space for [mem size 0x00100000 64bit]
pci 0000:03:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit]
pci 0000:03:00.0: BAR 10: no space for [mem size 0x00100000 64bit]
pci 0000:03:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit]
pci 0000:03:00.1: BAR 7: no space for [mem size 0x00100000 64bit]
pci 0000:03:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit]
pci 0000:03:00.1: BAR 10: no space for [mem size 0x00100000 64bit]
pci 0000:03:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff]
pci 0000:00:1c.0: bridge window [mem 0x20000000000-0x200001fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xe000-0xefff]
pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: No. 2 try to assign unassigned res
release child resource [mem 0xfb100000-0xfb17ffff pref]
release child resource [mem 0xfb180000-0xfb1fffff pref]
pci 0000:00:02.2: resource 14 [mem 0xfb100000-0xfb1fffff] released
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: BAR 14: assigned [mem 0x90200000-0x906fffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0x90200000-0x9027ffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0x90280000-0x902fffff pref]
pci 0000:03:00.0: BAR 7: assigned [mem 0x90300000-0x903fffff 64bit]
pci 0000:03:00.0: BAR 10: assigned [mem 0x90400000-0x904fffff 64bit]
pci 0000:03:00.1: BAR 7: assigned [mem 0x90500000-0x905fffff 64bit]
pci 0000:03:00.1: BAR 10: assigned [mem 0x90600000-0x906fffff 64bit]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [mem 0x90200000-0x906fffff]
pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff]
pci 0000:00:1c.0: bridge window [mem 0x20000000000-0x200001fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0xe000-0xefff]
pci 0000:06:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: resource 8 [mem 0x20000000000-0x23fffffffff window]
pci_bus 0000:02: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:03: resource 1 [mem 0x90200000-0x906fffff]
pci_bus 0000:03: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0x90000000-0x901fffff]
pci_bus 0000:05: resource 2 [mem 0x20000000000-0x200001fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfb0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:07:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 37548K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x74e86000-0x78e86000] (64MB) mapped at [ffff880074e86000-ffff880078e85fff]
Intel CQM monitoring enabled
Intel MBM enabled
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1525096856.896:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:02.2:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.2: Signaling PME through PCIe PME interrupt
pci 0000:02:00.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xfa000000, mapped to 0xffffc90003600000, using 1536k, total 1536k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x56
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb301000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-116-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-116-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-116-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 2-1: new high-speed USB device number 2 using xhci_hcd
usb 1-1: new high-speed USB device number 2 using ehci-pci
i8042: No controller found
tsc: Refined TSC clocksource calibration: 2399.997 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229834d6ac9, max_idle_ns: 440795285103 ns
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x50663, pf=0x10, revision=0x7000009
microcode: CPU1 sig=0x50663, pf=0x10, revision=0x7000009
microcode: CPU2 sig=0x50663, pf=0x10, revision=0x7000009
microcode: CPU3 sig=0x50663, pf=0x10, revision=0x7000009
microcode: CPU4 sig=0x50663, pf=0x10, revision=0x7000009
microcode: CPU5 sig=0x50663, pf=0x10, revision=0x7000009
microcode: CPU6 sig=0x50663, pf=0x10, revision=0x7000009
microcode: CPU7 sig=0x50663, pf=0x10, revision=0x7000009
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: aa84f01984fbd529c105810b59e379d349698248'
zswap: loaded using pool lzo/zbud
usb 2-1: New USB device found, idVendor=0624, idProduct=0248
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Gadget USB HUB
usb 2-1: Manufacturer: no manufacturer
usb 2-1: SerialNumber: 0123456789
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 5 ports detected
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 14:687:31
memory memory200: hash matches
rtc_cmos 00:00: setting system clock to 2018-04-30 14:00:59 UTC (1525096859)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1508K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1700K
Freeing unused kernel memory: 104K
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 13 bits of entropy available)
usb 2-2: new high-speed USB device number 3 using xhci_hcd
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
ixgbe: module verification failed: signature and/or required key missing - tainting kernel
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
Intel(R) 10GbE PCI Express Linux Network Driver - version 4.5.4
Copyright(c) 1999 - 2016 Intel Corporation.
pmd_set_huge: Cannot satisfy [mem 0xfbc00000-0xfbe00000] with a huge-page mapping due to MTRR override.
ixgbe: allow_unsupported_sfp Enabled
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb300000 port 0xfb300100 irq 34
ata2: SATA max UDMA/133 abar m2048@0xfb300000 port 0xfb300180 irq 34
ata3: SATA max UDMA/133 abar m2048@0xfb300000 port 0xfb300200 irq 34
ata4: SATA max UDMA/133 abar m2048@0xfb300000 port 0xfb300280 irq 34
ata5: SATA max UDMA/133 abar m2048@0xfb300000 port 0xfb300300 irq 34
ata6: SATA max UDMA/133 abar m2048@0xfb300000 port 0xfb300380 irq 34
usb 2-2: New USB device found, idVendor=05e3, idProduct=0608
usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-2: Product: USB2.0 Hub
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 2-1.1: new high-speed USB device number 4 using xhci_hcd
usb 2-1.1: New USB device found, idVendor=0624, idProduct=0249
usb 2-1.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 2-1.1: Product: Keyboard/Mouse Function
usb 2-1.1: Manufacturer: Avocent
usb 2-1.1: SerialNumber: 20121018
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0624:0249.0001/input/input2
usb 2-2.3: new low-speed USB device number 5 using xhci_hcd
hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-1.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:0624:0249.0002/input/input3
hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-1.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:0624:0249.0003/input/input4
hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-1.1/input2
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-11: KINGSTON SUV400S37120G, 0C3K87RA, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV400S 87RA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-10: WDC WD5000AZLX-08K2TA0, 02.01A02, max UDMA/100
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-10: WDC WD5000AZLX-08K2TA0, 02.01A02, max UDMA/100
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
ata4.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA WDC WD5000AZLX-0 1A02 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA WDC WD5000AZLX-0 1A02 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc9
sd 3:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1 sdb9
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 2-2.3: device descriptor read/64, error -32
usb 2-2.3: New USB device found, idVendor=20a0, idProduct=41e5
usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2.3: Product: FP-LED v1
usb 2-2.3: Manufacturer: Datto, Inc.
usb 2-2.3: SerialNumber: BS016622-1.0
usb 2-2.3: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes
hid-generic 0003:20A0:41E5.0004: hiddev0,hidraw3: USB HID v1.01 Device [Datto, Inc. FP-LED v1] on usb-0000:00:14.0-2.3/input0
clocksource: Switched to clocksource tsc
ixgbe 0000:03:00.0 eth0: MAC: 5, PHY: 6, PBA No: 000600-000
ixgbe 0000:03:00.0: 1c:1b:0d:91:ad:37
ixgbe 0000:03:00.0 eth0: Enabled Features: RxQ: 8 TxQ: 8 FdirHash vxlan_rx
ixgbe 0000:03:00.0 eth0: Intel(R) 10 Gigabit Network Connection
ixgbe: allow_unsupported_sfp Enabled
ixgbe 0000:03:00.1 eth1: MAC: 5, PHY: 6, PBA No: 000600-000
ixgbe 0000:03:00.1: 1c:1b:0d:91:ad:38
ixgbe 0000:03:00.1 eth1: Enabled Features: RxQ: 8 TxQ: 8 FdirHash vxlan_rx
ixgbe 0000:03:00.1 eth1: Intel(R) 10 Gigabit Network Connection
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: sse2x1 gen() 7848 MB/s
raid6: sse2x1 xor() 5814 MB/s
raid6: sse2x2 gen() 9608 MB/s
raid6: sse2x2 xor() 6352 MB/s
raid6: sse2x4 gen() 11195 MB/s
raid6: sse2x4 xor() 7663 MB/s
raid6: avx2x1 gen() 15173 MB/s
raid6: avx2x2 gen() 17639 MB/s
raid6: avx2x4 gen() 20260 MB/s
raid6: using algorithm avx2x4 gen() 20260 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 21557.000 MB/sec
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
Btrfs loaded
random: nonblocking pool is initialized
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd-sysv-generator[890]: Overwriting existing symlink /run/systemd/generator.late/apache2.service with real service.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: PNFS blkmaping enablement. is not active.
systemd[1]: Dependency failed for pNFS block layout mapping daemon.
systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Journal Service...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Reached target Slices.
systemd[1]: Starting Set console keymap...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Started Create list of required static device nodes for the current kernel.
EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create Static Device Nodes in /dev...
8021q: 802.1Q VLAN Support v1.8
systemd[1]: Started LVM2 metadata daemon.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Started Load/Save Random Seed.
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
systemd[1]: Started Set console keymap.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd[1]: Mounted NFSD configuration filesystem.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
systemd-journald[909]: Received request to flush runtime journal from PID 1
iscsi: registered transport (iser)
ipmi message handler version 39.2
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ioatdma: Intel(R) QuickData Technology Driver 4.00
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6c
EDAC sbridge: Seeking for: PCI ID 8086:6f6d
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k SSFS
ipmi_si IPI0001:00: Found new BMC (man_id: 0x003c0a, prod_id: 0x0403, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
zavl: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
SPL: Loaded module v0.6.5.8-1.1ubuntu16.04
ZFS: Loaded module v0.6.5.8-2.1ubuntu16.04, ZFS pool version 5000, ZFS filesystem version 5
SPL: using hostid 0x00000000
audit: type=1400 audit(1525096868.158:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2915 comm="apparmor_parser"
audit: type=1400 audit(1525096868.158:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2915 comm="apparmor_parser"
audit: type=1400 audit(1525096868.158:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2915 comm="apparmor_parser"
audit: type=1400 audit(1525096868.158:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2915 comm="apparmor_parser"
audit: type=1400 audit(1525096868.226:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=2916 comm="apparmor_parser"
audit: type=1400 audit(1525096868.278:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=2917 comm="apparmor_parser"
ixgbe 0000:03:00.1: registered PHC device on eth1
8021q: adding VLAN 0 to HW filter on device eth1
ixgbe 0000:03:00.0: registered PHC device on eth0
8021q: adding VLAN 0 to HW filter on device eth0
ixgbe 0000:03:00.0 eth0: NIC Link is Up 1 Gbps, Flow Control: RX/TX
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81ef9a80)
ipmi device interface
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr1-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr1: port 1(virbr1-nic) entered listening state
virbr1: port 1(virbr1-nic) entered listening state
virbr1: port 1(virbr1-nic) entered disabled state
systemd-sysv-generator[4977]: Overwriting existing symlink /run/systemd/generator.late/apache2.service with real service.
systemd-sysv-generator[5026]: Overwriting existing symlink /run/systemd/generator.late/apache2.service with real service.
systemd-sysv-generator[5042]: Overwriting existing symlink /run/systemd/generator.late/apache2.service with real service.
nfsd: last server has exited, flushing export cache
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81ef9a80)
iSCSI Enterprise Target Software - version trunk
iscsi_trgt: Registered io type fileio
iscsi_trgt: Registered io type blockio
iscsi_trgt: Registered io type nullio
u32 classifier
Actions configured
usb 2-3: new full-speed USB device number 6 using xhci_hcd
usb 2-3: New USB device found, idVendor=058f, idProduct=9254
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Generic USB Hub
usb 2-3: Manufacturer: ALCOR
usb 2-3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 2-3.1: new full-speed USB device number 7 using xhci_hcd
usb 2-3.1: New USB device found, idVendor=046d, idProduct=c318
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1: Product: Logitech Illuminated Keyboard
usb 2-3.1: Manufacturer: Logitech
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:046D:C318.0005/input/input5
hid-generic 0003:046D:C318.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3.1/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.1/0003:046D:C318.0006/input/input6
hid-generic 0003:046D:C318.0006: input,hiddev0,hidraw5: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3.1/input1
usb 2-3.3: new low-speed USB device number 8 using xhci_hcd
usb 2-3.3: New USB device found, idVendor=10d5, idProduct=55a4
usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.3: Product: 4 Port KVMSwicther
usb 2-3.3: Manufacturer: No brand
usb 2-3.3: SerialNumber: 2ôÒ
usb 2-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-3.3: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:10D5:55A4.0007/input/input7
hid-generic 0003:10D5:55A4.0007: input,hidraw6: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:14.0-3.3/input0
usbhid 2-3.3:1.1: couldn't find an input interrupt endpoint
perf interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 2-3: USB disconnect, device number 6
usb 2-3.1: USB disconnect, device number 7
usb 2-3.3: USB disconnect, device number 8
usb 2-3: new full-speed USB device number 9 using xhci_hcd
usb 2-3: New USB device found, idVendor=058f, idProduct=9254
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Generic USB Hub
usb 2-3: Manufacturer: ALCOR
usb 2-3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 2-3.1: new full-speed USB device number 10 using xhci_hcd
usb 2-3.1: New USB device found, idVendor=046d, idProduct=c318
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1: Product: Logitech Illuminated Keyboard
usb 2-3.1: Manufacturer: Logitech
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:046D:C318.0008/input/input8
hid-generic 0003:046D:C318.0008: input,hidraw4: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3.1/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.1/0003:046D:C318.0009/input/input9
hid-generic 0003:046D:C318.0009: input,hiddev0,hidraw5: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3.1/input1
usb 2-3.3: new low-speed USB device number 11 using xhci_hcd
usb 2-3.3: New USB device found, idVendor=10d5, idProduct=55a4
usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.3: Product: 4 Port KVMSwicther
usb 2-3.3: Manufacturer: No brand
usb 2-3.3: SerialNumber: 2ôÒ
usb 2-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-3.3: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:10D5:55A4.000A/input/input10
hid-generic 0003:10D5:55A4.000A: input,hidraw6: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:14.0-3.3/input0
usbhid 2-3.3:1.1: couldn't find an input interrupt endpoint
usb 2-3: USB disconnect, device number 9
usb 2-3.1: USB disconnect, device number 10
usb 2-3.3: USB disconnect, device number 11
usb 2-3: new full-speed USB device number 12 using xhci_hcd
usb 2-3: New USB device found, idVendor=058f, idProduct=9254
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Generic USB Hub
usb 2-3: Manufacturer: ALCOR
usb 2-3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 2-3.1: new full-speed USB device number 13 using xhci_hcd
usb 2-3.1: New USB device found, idVendor=046d, idProduct=c318
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1: Product: Logitech Illuminated Keyboard
usb 2-3.1: Manufacturer: Logitech
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:046D:C318.000B/input/input11
hid-generic 0003:046D:C318.000B: input,hidraw4: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3.1/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.1/0003:046D:C318.000C/input/input12
hid-generic 0003:046D:C318.000C: input,hiddev0,hidraw5: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3.1/input1
usb 2-3.3: new low-speed USB device number 14 using xhci_hcd
usb 2-3: USB disconnect, device number 12
usb 2-3.3: Device not responding to setup address.
usb 2-3.3: Device not responding to setup address.
usb 2-3.3: device not accepting address 14, error -71
usb 2-3.1: USB disconnect, device number 13
usb 2-3: new full-speed USB device number 18 using xhci_hcd
usb 2-3: New USB device found, idVendor=058f, idProduct=9254
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Generic USB Hub
usb 2-3: Manufacturer: ALCOR
usb 2-3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
usb 2-3.1: new full-speed USB device number 19 using xhci_hcd
usb 2-3.1: New USB device found, idVendor=046d, idProduct=c318
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1: Product: Logitech Illuminated Keyboard
usb 2-3.1: Manufacturer: Logitech
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:046D:C318.000D/input/input13
hid-generic 0003:046D:C318.000D: input,hidraw4: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3.1/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1:1.1/0003:046D:C318.000E/input/input14
hid-generic 0003:046D:C318.000E: input,hiddev0,hidraw5: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-3.1/input1
usb 2-3.3: new low-speed USB device number 20 using xhci_hcd
usb 2-3.3: New USB device found, idVendor=10d5, idProduct=55a4
usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.3: Product: 4 Port KVMSwicther
usb 2-3.3: Manufacturer: No brand
usb 2-3.3: SerialNumber: 2ôÒ
usb 2-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-3.3: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:10D5:55A4.000F/input/input15
hid-generic 0003:10D5:55A4.000F: input,hidraw6: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:14.0-3.3/input0
usbhid 2-3.3:1.1: couldn't find an input interrupt endpoint
usb 3-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-5: New USB device found, idVendor=1b8f, idProduct=0330
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-5: Product: EXPRESS ST2I
usb 3-5: Manufacturer: STT
usb 3-5: SerialNumber: 3116346600000144
usb-storage 3-5:1.0: USB Mass Storage device detected
scsi host6: usb-storage 3-5:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access STT EXPRESS ST2I 1.00 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdd] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
sdd:
sd 6:0:0:0: [sdd] Attached SCSI removable disk
systemd-sysv-generator[17307]: Overwriting existing symlink /run/systemd/generator.late/apache2.service with real service.
usb 2-3: USB disconnect, device number 18
usb 2-3.1: USB disconnect, device number 19
usb 2-3.3: USB disconnect, device number 20
python2 (10009): drop_caches: 3
python2 (10009): drop_caches: 3
python2 (12336): drop_caches: 3
python2 (12336): drop_caches: 3
python2 (16070): drop_caches: 3
python2 (16070): drop_caches: 3
python2 (18515): drop_caches: 3
python2 (18515): drop_caches: 3
python2 (21543): drop_caches: 3
python2 (21543): drop_caches: 3
python2 (24411): drop_caches: 3
python2 (24411): drop_caches: 3